所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
耐水泥环境下南京INA轴承轮毂系列的热处理 来源:御狮轴承   点击:次   日期:2018-08-14 10:08

南京INA轴承用于拖拉机变速箱、车轮、发动机和其他部件。具有耐泥浆热处理技术的轴承可用于泥浆和重载条件下。

Nanjing INA bearings are used for tractor gearboxes, wheels, engines and other components。 Bearings with mud resistant heat treatment technology can be used in slurry and heavy load conditions。

当汽车轮毂南京INA轴承损坏时,底盘轮的相应位置产生连续的摩擦和碰撞声,即“咔哒咔哒”声。

When the Nanjing INA bearing of the automobile hub is damaged, the corresponding position of the chassis wheel produces continuous friction and collision sound, namely "click click click".

通常,南京INA轴承轮毂和制动盘之间的异常摩擦大大增加了驱动阻力。在严重的情况下,车轮机构会损坏,轮毂会脱落,造成严重的交通事故。因此,轮毂轴承的选择大大提高了安全性。

In general, the abnormal friction between the INA bearing hub and brake disc in Nanjing greatly increases the drive resistance。 In serious cases, the wheel mechanism will be damaged and the hub will fall off, causing serious traffic accidents。 Therefore, the selection of hub bearings greatly improves the safety。

拖拉机是安装在车体前后的各种作业机械,可用于农田牵引机械、播种、施肥、喷洒等。

Tractors are all kinds of operating machinery installed before and after the car body, which can be used for farmland traction machinery, seeding, fertilization, spraying and so on.

一旦轴承具有明显的阻力和摩擦,螺母慢慢松动,直到一个新的开口销插入最近的开口销孔。

Once the bearing has obvious resistance and friction, the nut slowly loosens until a new opening pin is inserted into the nearest opening pin hole.

在任何情况下,南京INA轴承螺母不应旋转以松开1/4的环,否则会导致轮毂轴承松动,导致早期磨损。插入销后,应移动和弯曲端部,防止脱落。

In any case, the Nanjing INA bearing nut should not be rotated to loosen 1/4 of the ring, otherwise it will cause hub bearing loosening, leading to early wear. After inserting pins, the ends should be moved and bent to prevent falling off.

此外,欧美等农业机械的使用也逐渐发展到规模化、南京INA轴承化的条件越来越苛刻。

In addition, the use of agricultural machinery such as Europe and the United States has gradually developed to large-scale, Nanjing INA bearings increasingly harsh conditions.

为了满足这些要求,我们采用特殊材料密封轴承,采用特殊材料热处理工艺和高纯南京INA轴承,开发了世界领先的设计技术、材料技术、摩擦学技术和制造技术。其他产品达到了前所未有的寿命和对外界物体的抵抗性。对。

In order to meet these requirements, we have developed the world's leading design, material, tribology and manufacturing technologies by using special material seal bearings, special material heat treatment process and high purity Nanjing INA bearings。 Other products have reached unprecedented life expectancy and resistance to external objects。 Yes。

最后,将防尘盖扣回到制动鼓上,并安装返回轮。保持车轮两侧,并摇动它允许一个小间隙。

Finally, the dust cover is buckled back to the brake drum and the return wheel is installed. Keep the wheels on both sides and shake it to allow a small clearance.

如果轮毂南京INA轴承严重损坏,必须更换裂纹、点蚀或烧蚀。在安装新轴承之前,润滑它们并顺序组装它们。轴承的更换必须是灵活的,没有杂乱和振动。

If the hub of Nanjing INA bearing is seriously damaged, cracks, pitting or ablation must be replaced. Before installing the new bearings, lubricate them and assemble them sequentially. The replacement of bearings must be flexible, free from clutter and vibration.

 

文章来自:南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自:南京INA轴承 www.xzahg.com

The article is from: Nanjing INA bearing www。ina-china。cn

文章来自:南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

 

QQ524085168  

电话:0510-81207777

手机:13311666672

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-08-14 10:08:44  【打印此页】  【关闭
关于我们 品牌展示
快乐飞艇6码计划算法 快乐飞艇 快乐飞艇彩票玩法 幸运时时彩 快乐赛车计划下载 北京赛车pk10玩法 快乐赛车作弊器 快乐飞艇 快乐赛车是正规福彩吗 快乐赛车官方计划软件