所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
扬州INA轴承保养检修可靠与否 来源:御狮轴承   点击:次   日期:2018-07-25 09:28

为了尽可能长时间地以良好状态维持扬州INA轴承本来的性能,须保养、检修、以求防事故于未然,确保运转的可靠性,提高生产性、经济性。

In order to maintain the original performance of Yangzhou INA bearing in a good state as long as possible, it must be maintained and overhauled to prevent the accident, ensure the reliability of the operation and improve the production and economy.

保养最好相应机械运转条件的作业标准,定期进行。内容包括监视运转状态、补充或更换润滑剂、定期拆卸的检查。

Maintain the best operating standards for the corresponding mechanical operation conditions and carry out them regularly. The contents include monitoring operation status, replenishment or replacement of lubricants, and regular disassembly inspection.

作为运转中的检修事项,有扬州INA轴承的旋转音、振动、温度、润滑剂的状态等等。

As a matter of overhaul in operation, there are revolving sound, vibration, temperature, lubricant status of Yangzhou INA bearing and so on.

扬州INA轴承的清洗:拆卸下轴承检修时,首先记录轴承的外观,确认润滑剂的残存量,取样检查用的润滑剂之后,洗轴承。作为清洗剂,普通使用清洗剂、煤油。

Yangzhou INA bearing cleaning: When dismantling lower bearing maintenance, first record the appearance of bearing, confirm the residual amount of lubricant, after sampling and checking the lubricant, wash bearings。 As cleaning agents, cleaning agents and kerosene are commonly used。

拆下来的扬州INA轴承的清洗,分粗清洗和细清洗,分别放在容器中,先放上金属的网垫底,使轴承不直接接触容器的脏物。粗清洗时,如果使轴承带着脏物旋转,会损伤轴承的滚动面,应该加以注意。在粗清洗油中,使用刷子清除去润滑脂、粘着物,大致干净后,转入精洗。

The dismantled Yangzhou INA bearings are cleaned with coarse cleaning and fine cleaning. They are placed in the container respectively. The metal mesh bottom is put on the bottom of the metal mesh, so that the bearing does not contact the body of the container directly. In rough cleaning, if the bearing rotates with the dirt, it will damage the rolling surface of the bearing, so we should pay attention to it. In crude oil wash, remove grease and adhesive with brush. After cleaning, turn to fine wash.

精洗,是将扬州INA轴承在清洗油中一边旋转,一边仔细的清洗。另外,清洗油也要经常保持清洁。

Fine cleaning is to wash the INA bearing of Yangzhou in the cleaning oil while cleaning. In addition, the cleaning oil should always be kept clean.

扬州INA轴承的检修和判断:为了判断拆卸下来的轴承是否可以使用,要在轴承洗干净后检查。检查滚道面、滚动面、配合面的状态、保持架的磨损情况、轴承游隙的增加及有无关尺寸精度下降的损伤,异常。非分离型小型球轴承,则用一只手将内圈支持水平,旋转外圈确认是否流畅。

Maintenance and judgement of INA bearing in Yangzhou: in order to determine whether the dismantled bearing can be used, check after bearing cleaning. Check the raceway surface, rolling surface, mating surface condition, the wear condition of the cage, the increase of bearing clearance and the damage caused by unrelated dimension precision. The non separable small ball bearing supports the inner ring with one hand and checks the outer ring to confirm whether it is fluent or not.

圆锥滚子轴承等分离形扬州INA轴承,可以对滚动体、外圈的滚道面分别检查。

The tapered roller bearing is equally divided and separated from the Yangzhou INA bearing。 It can check the raceway surface of rolling body and outer ring separately。

大型轴承因不能用手旋转,注意检查滚动体、滚道面、保持架、挡边面等外观,轴承的重要性愈高愈须慎重检查。

Large bearings can not be rotated with their hands. Pay attention to checking the appearance of rolling body, raceway surface, cage and side face. The more important the bearing is, the more careful inspection is necessary.

使用扬州INA轴承的各种机械装置、仪器等的市场要求性能日趋严格,对于轴承所要求的条件、性能也日趋多样化。为了能从为数众多的结构、尺寸中,选择最适合的轴承,需要从各种角度研究。在选择轴承时,一般,考虑作为轴系的轴承排列、安装、拆卸之难易度、轴承所允许的空间、尺寸及轴承的市场性等,大致决定轴承结构。其次,一边比较研究使用轴承的各种机械的设计寿命和轴承的各种不同的耐久限度,一边决定轴承尺寸。

The market requirements of various mechanical devices and instruments used in Yangzhou INA bearings are becoming increasingly stringent, and the requirements and performance of bearings are becoming more and more diversified。 In order to select the most suitable bearings from a large number of structures and sizes, it is necessary to study from various angles。 In the choice of bearings, generally, considering the bearing arrangement, installation and disassembly of bearing, the space, size and market of bearing, the bearing structure is roughly determined。 Secondly, on the other hand, we compare the design life of bearings and the various durability limits of bearings, and decide the bearing dimensions。

在选择扬州INA轴承时,往往偏于只考虑轴承的疲劳寿命,有关由润滑脂老化而发生的润滑脂寿命、磨损、噪音等也需要充分研究。再者,根据不同的用途,有必要选择对精度、游隙、保持架结构、润滑脂等等要求,作特别设计的轴承。但是,选择轴承并没有一定的顺序、规则,优先应考虑的是对扬州INA轴承所要求的条件、性能、最有关连的事项,尤为实际。

When choosing the INA bearing in Yangzhou, the fatigue life of the bearings is often taken into account, and the life, wear and noise of the grease, which are caused by the aging of the grease, need to be fully studied。 Moreover, according to different uses, it is necessary to choose the bearings specially designed for the accuracy, clearance, cage structure, grease and so on。 However, the selection of bearings has no definite order and rules。 The priority should be given to the conditions, performance and the most related matters required by the Yangzhou INA bearing, especially in practice。

 

文章来自:扬州SKF轴承 www.wh-skf.com

The article comes from: Yangzhou SKF bearing www.wh-skf.com

文章来自:扬州INA轴承 www.xzahg.com

The article comes from: Yangzhou INA bearing www.xzahg.com

文章来自:扬州NSK轴承 www.klbbearings.com

The article comes from: Yangzhou NSK bearing www.klbbearings.com

 

QQ524085168  

电话:0510-81207777

手机:13311666672

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-07-25 09:28:05  【打印此页】  【关闭
关于我们 品牌展示
快乐赛车哪个网站有 快乐飞艇是国家发行的吗 快乐飞艇 快乐飞艇如何购买 欧洲快乐赛车计划 快乐赛车官方计划软件 快乐飞艇能玩吗 快乐飞艇怎样稳赚 快乐赛车是不是假的 快乐飞艇如何玩才能盈利