所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承自润滑的优点名册 来源:御狮轴承   点击:次   日期:2018-07-15 21:59

自润滑江苏INA轴承具有承载力高、抗冲击、耐高温、自润滑能力强的特点。特别适用于重载、低速、往复或摆动、润滑性差、形成油膜,不易腐蚀其它酸。

Self lubricating Jiangsu INA bearing has the characteristics of high bearing capacity, impact resistance, high temperature resistance and strong self lubrication ability. It is especially suitable for heavy load, low speed, reciprocating or swinging, poor lubricity, oil film formation, and is not easy to corrode other acids.

目前,该江苏INA轴承产品已广泛应用于冶金连铸机、轧机设备、矿山机械、模具、起重机械、纺织机械、风力发电、船舶、水轮机、水轮机、注塑机及设备生产线。

At present, the Jiangsu INA bearing products have been widely used in metallurgical caster, rolling mill equipment, mining machinery, mould, lifting machinery, textile machinery, wind power generation, ship, water turbine, water turbine, injection machine and equipment production line.

耐磨性是江苏INA轴承衬套的两倍。自润滑轴承的五个特点是:

The wear resistance is two times that of the Jiangsu INA bearing bushing. The five characteristics of self - lubricating bearing are:

1。江苏INA轴承性能好,耐磨性好。

1. Jiangsu INA bearing has good performance and good wear resistance.

2。适用于高负荷、低转速下的回转运动和摇摆运动。它经常发生在频繁的负载,难以形成流体动力润滑。

2. It is suitable for rotary motion and rocking motion under high load and low speed. It often occurs in frequent loads and is difficult to form hydrodynamic lubrication.

3,在江苏INA轴承边界润滑条件下,长时间不加油。

3, under the condition of INA bearing boundary lubrication in Jiangsu, it will not be refueling for a long time.

4,表面塑性层在成形过程中会留下一定的余量。在装配到阀座孔后,可以对其进行加工,以获得更好的装配尺寸。

4, the surface plastic layer will leave some allowance in the forming process. After assembling to the seat hole, it can be machined for better assembly size.

5、江苏INA轴承产品主要用于汽车底盘、冶金机械、矿山机械、水利机械、工程机械、农业机械、轧钢设备等。

5, Jiangsu INA bearing products are mainly used in automobile chassis, metallurgical machinery, mining machinery, water conservancy machinery, construction machinery, agricultural machinery, rolling equipment and so on.

安装江苏INA轴承时,根据各部件的拆卸顺序,注意安装顺序相反。骨架油封、驱动轴承座和外轴承座应多润滑,以免在油压作用时损坏油封,造成漏油。

When installing the INA bearing in Jiangsu, the installation sequence is the opposite according to the disassembly sequence of the components. The skeleton oil seal, the drive bearing block and the outer bearing base should be lubricated more frequently, so as to avoid damaging the oil seal when the oil pressure is acting, resulting in oil leakage.

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com 

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-07-15 21:59:41  【打印此页】  【关闭
关于我们 品牌展示
快乐飞艇怎样稳赚 快乐飞艇介绍 快乐飞艇统一开奖吗 快乐赛车什么方法稳 快乐飞艇怎么赢钱 全天快乐赛车人工计划 快乐赛车计划下载 快乐飞艇代理 快乐赛车是正规福彩吗 快乐飞艇彩票安全吗