所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承日常巡检所遇到的问题 来源:御狮轴承   点击:次   日期:2018-07-10 09:55

当江苏INA轴承被接受时,验收主要包括常规检查,如江苏INA轴承间隙尺寸的三个尺寸和尺寸精度。应该注意的是,无论什么样的检查方法,我们都必须严格遵守江苏INA轴承国家标准。详细讨论了常规检查的方法。

When Jiangsu INA bearings are accepted, the acceptance mainly includes routine inspection, such as the three dimensions and dimensional accuracy of INA bearing clearance dimensions in Jiangsu. It should be noted that no matter what kind of inspection methods, we must strictly abide by the Jiangsu INA bearing national standards. The method of routine inspection is discussed in detail.

1,允许测量误差

1, allowable measurement error

理论上,江苏INA轴承测量误差应控制在公差的10%以下。另外,为了保证测量数据的准确性,为了有效地控制测量误差,必须使用专用的测量工具。

Theoretically, the INA bearing measurement error in Jiangsu should be controlled below 10% of the tolerance. In addition, in order to ensure the accuracy of measurement data, in order to effectively control the measurement error, special measuring tools must be used.

2,实测面积调整

2, measured area adjustment

在测量江苏INA轴承时,测量区域的国内外标准存在一定的差异。通常,在环的两端测量倒角的两倍,而内需是环的南端最大的倒角坐标。

When measuring INA bearings in Jiangsu, there are some differences between the domestic and international standards of the measuring area。 Usually, two times the chamfer angle is measured at both ends of the ring, and the internal demand is the largest chamfering coordinate at the southern end of the ring。

3,尺寸测量

3, size measurement

对于江苏INA轴承尺寸的测量,我们可以采用比较测量的方法来测量。根据规定,使用剂量块或标准件作为比较测量的基准。

For the measurement of the bearing size of Jiangsu INA, we can use the method of comparative measurement to measure。 According to the regulations, dosage blocks or standard parts are used as benchmark for comparative measurement。

4,温度调节

4, temperature regulation

当江苏INA轴承被检查和检查时,环境温度应控制在20摄氏度。此外,轴承、量块等可以放置在同一金属板上,从而可以在最短的时间内实现温度平衡。当然,为了保证测量结果的准确性,我们应该尽量避免用手直接测量,因为手上的温度会影响测量值。

When Jiangsu INA bearings are inspected and inspected, the ambient temperature should be controlled at 20 degrees Celsius. Besides, bearings, gauge blocks and so on can be placed on the same metal plate, so that the temperature balance can be realized in the shortest time. Of course, in order to ensure the accuracy of the measurement results, we should try to avoid direct measurement by hand, because the temperature on the hand will affect the measured value.

5,负荷测量规程

5, the regulation of load measurement

江苏INA轴承检查,主要是起亚、KEA等十四项指标。特别是,在测量起亚时,需要施加必要的测量负载以确保稳定的测量值。

Jiangsu INA bearing inspection, mainly KIA, KEA and other fourteen indicators. In particular, when measuring KIA, it is necessary to apply the necessary measurement load to ensure a stable measurement value.

轴承装配前的检查是保证轴承稳定可靠、操作精度高的重要保证。同时,它对减少轴承故障的发生和达到预期的效果起着重要的作用。

Inspection before bearing assembly is an important guarantee for ensuring stable and reliable bearing and high operation accuracy。 At the same time, it plays an important role in reducing the occurrence of bearing failures and achieving the desired results。

 

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com 

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-07-10 09:55:00  【打印此页】  【关闭
关于我们 品牌展示
快乐赛车单双 快乐赛车平台官网 快乐飞艇怎么买 山东11选5开奖 快乐赛车计划软件 快乐赛车5码计划 福建11选5官网 快乐飞艇如何购买 快乐飞艇官方网站 快乐飞艇app