所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承薄壁偏心负荷技术游隙型公差 来源:御狮轴承   点击:次   日期:2018-06-26 10:54

在正常情况下,江苏INA轴承承受轴向和径向载荷,承载偏心载荷的能力非常有限。如果对这些江苏INA轴承施加偏心载荷,轴承内部的载荷分布将不合理,从而降低了Kayon轴承的寿命并产生热量。在偏心载荷作用下的载荷轨迹。

Under normal circumstances, the INA bearings of Jiangsu bear axial and radial loads, and the ability to carry eccentric loads is very limited。 If the eccentric load is applied to these Jiangsu INA bearings, the load distribution inside the bearing will be unreasonable, thus reducing the life of Kayon bearings and generating heat。 The load track under the action of eccentric load。

江苏INA轴承的公差将影响薄壁轴承的内部载荷分布,导致异常的载荷轨迹。

The tolerance of INA bearings in Jiangsu will affect the internal load distribution of thin-walled bearings, resulting in abnormal load trajectories.

江苏INA轴承载荷标记表明轴承腔可能具有非常差的圆度,因此在非加载区域中的球受到相同的载荷,从而轴承在运行期间会产生热量和噪声。如果发现薄壁轴承轴承轨道,必须调整轴承腔的圆度。计算了几何公差的圆度。

The load mark of the Jiangsu INA bearing indicates that the bearing cavity may have a very poor roundness, so the ball in the non loaded area is subjected to the same load, so that the bearing will produce heat and noise during the operation. If a thin-walled bearing bearing track is found, the roundness of the bearing chamber must be adjusted. The roundness of geometric tolerances is calculated.

江苏INA轴承工作面应具有一定量的润滑脂,但也可防止过多的润滑脂流失。

Jiangsu INA bearing working face should have a certain amount of grease, but it can also prevent excessive loss of grease.

一般而言,薄壁轴承与薄壁轴承之间存在一定的间隙,其余部分将分布在非载荷区域。残余间隙对滚动轴承寿命的影响还为时过早。轴承间隙过大,间隙过早。

Generally, there is a gap between thin-walled bearings and thin-walled bearings, and the rest will be distributed in non load areas. The effect of residual clearance on the life of rolling bearings is premature. The gap between the bearings is too large and the clearance is too early.

这些江苏INA轴承在燃烧前的性能是噪声和热,而薄壁轴承滚道表面的载荷轨迹导致了Kayon轴承的残余残余量小,这可能包括:内圈太紧,温度差。内外环太大了。及时调整和修改。

The performance of these Jiangsu INA bearings before combustion is noise and heat, and the load track on the surface of the thin wall bearing raceway leads to the small residual residual amount of the Kayon bearing, which may include: the inner ring is too tight and the temperature is poor. The inner and outer rings are too big. Adjust and modify in time.

除了江苏INA轴承的质量外,它也是一个非常精密的部件。它是一种高性能轴承。如果在使用中误用,将无法达到预期的功能结果,这将容易导致轴承损坏。在润滑方面,每个人都必须注意。

In addition to the quality of INA bearings in Jiangsu, it is also a very precise component. It is a kind of high performance bearing. If misused in use, it will not be able to achieve the desired functional results, which will easily lead to bearing damage. In the aspect of lubrication, everyone must pay attention to it.

一般来说,江苏INA轴承在高温轴承的质量很强,不能与普通轴承产品相比,但即使轴承的优点和缺点,如轴承正宗的日本轴承都比国内J轴承的质量好得多。惯性导航与制导。环,我们应该检查江苏INA轴承的质量。

Generally speaking, Jiangsu INA bearing in high temperature bearing quality is very strong, can not be compared with the ordinary bearing products, but even the advantages and disadvantages of bearing, such as bearing authentic Japanese bearings are much better than the quality of domestic J bearings. Inertial navigation and guidance. Ring, we should check the quality of INA bearing in Jiangsu.

 

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www。wh-skf。com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-06-26 10:54:55  【打印此页】  【关闭
关于我们 品牌展示
快乐飞艇和值怎么计算 快乐赛车开奖直播 快乐赛车单双 快乐赛车冠军技巧 快乐飞艇 北京快乐赛车 快乐赛车北京pk10 快乐赛车什么方法稳 快乐赛车全天人工计划 玩快乐飞艇犯法吗