所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承同样却不简单的维护 来源:御狮轴承   点击:次   日期:2018-06-21 16:22

江苏INA轴承的维护和应用描述如下:

The maintenance and application of Jiangsu INA bearing are described as follows:

1。保持江苏INA轴承润滑和清洁。在检查江苏INA轴承之前,必须清洗江苏INA轴承的表面,并且必须去除江苏INA轴承周围的零件。这里我们要注意油封是非常易碎的零件,所以在检查和拆卸时,江苏INA轴承不应过大的作用力,以免造成零件损坏。如果在江苏INA轴承的油封和周边部件检查过程中出现不良症状,应更换,以免损坏密封油封造成的江苏INA轴承。

1. Keep the Jiangsu INA bearings lubricated and clean. Before checking the bearing of Jiangsu INA, the surface of Jiangsu INA bearing must be cleaned, and the parts around Jiangsu INA bearing must be removed. Here we should pay attention to the oil seal is very fragile parts, so in inspection and dismantling, Jiangsu INA bearing should not be too large force, so as to avoid damage to the parts. If there are bad symptoms during the inspection of oil seals and peripheral parts of INA bearings in Jiangsu, they should be replaced to avoid damaging the bearing of Jiangsu INA caused by sealing oil seals.

2。江苏INA轴承润滑油质量。后来,很多人发现江苏INA轴承的寿命太短了。发现润滑剂的质量也直接受到其它因素的影响。江苏INA轴承的润滑通过两个手指之间的润滑剂摩擦来测试。如果有污染物,你可以感觉到,或者在你的手后部涂上润滑剂,然后用光把它密封起来。然后,使用它代替江苏INA轴承的润滑剂。

2. Jiangsu INA bearing lubricating oil quality. Later, many people found that the life of INA bearings in Jiangsu was too short. It is found that the quality of lubricants is also directly affected by other factors. The lubrication of INA bearings in Jiangsu is tested by the lubricant friction between two fingers. If you have any contaminants, you can feel it, or apply a lubricant on the back of your hand, then seal it up with light. Then replace it with the lubricant of INA bearing in Jiangsu.

注:油在使用前最好先过滤。当用江苏INA轴承润滑油脂代替油脂时,应避免使用棉头轴承来支撑任何部件。由于这些残余纤维可能被楔入滚动部件之间并造成损伤,特别是小轴承的应用,因此应更加重视这一问题。

Note: oil is best filtered first before use. When Jiangsu INA bearing grease is used instead of grease, cotton head bearing should be avoided to support any part. Since these residual fibers may be wedged between the rolling parts and cause damage, especially the application of small bearings, more attention should be paid to this problem.

3.江苏INA轴承的工作环境。在检查江苏INA轴承时,不要将它们暴露于污染物或潮湿环境中。如果工作中断,机器必须用油纸塑料板或类似的材料覆盖。轴承的工作环境也是非常重要的。许多机器由于恶劣的工作条件而进口轴承,导致进口轴承的使用寿命缩短。

3。 Jiangsu INA bearing working environment。 When checking Jiangsu INA bearings, do not expose them to pollutants or wet environments。 If the work is interrupted, the machine must be covered with oil paper plastic boards or similar materials。 The working environment of the bearing is also very important。 Many machines import bearings because of poor working conditions, resulting in shortened service life of imported bearings。

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www。wh-skf。com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-06-21 16:22:03  【打印此页】  【关闭
关于我们 品牌展示
快乐飞艇6码计划算法 快乐飞艇怎么样 快乐飞艇免费计划 快乐飞艇是骗人的吗 快乐赛车代理怎么弄 快乐飞艇代理 快乐赛车福利彩票 快乐赛车哪个网站有 快乐飞艇彩票安全吗 快乐飞艇怎样玩才有钱赚