所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承高性能与寿命的互换比 来源:御狮轴承   点击:次   日期:2018-06-18 22:05

无论使用何种高性能轴承,如果它们被误用,它们将无法达到期望的高性能。应注意轴承的使用。

No matter how high performance bearings are used, if they are misused, they will not be able to achieve the desired high performance. Attention should be paid to the use of bearings.

1。保持江苏INA轴承及其周围环境的清洁,即使肉眼看不见的微小灰尘进入江苏INA轴承,也会增加轴承的磨损、振动和噪音。轴承及其周围附件应保持清洁,特别是灰尘和灰尘,工具和工作环境必须保持清洁。

1. Keeping the Jiangsu INA bearing and its surrounding environment clean, even if the tiny dust invisible to the naked eye enters the Jiangsu INA bearing, it will also increase the wear, vibration and noise of the bearing. Bearings and their surrounding accessories should be kept clean, especially dust and dust. Tools and working environment must be kept clean.

二、在使用安装时,必须注意不要允许强力冲压,不允许锤子直接撞击江苏INA轴承,不允许滚动体通过压力。

Two, in the use of installation, we must be careful not to allow strong stamping, do not allow hammers to directly hit Jiangsu INA bearings, do not allow the rolling body to pass the pressure。

三,使用适当准确的安装工具,尽量使用专用工具,避免使用布料和短纤维。

Three, use proper and accurate installation tools, and use special tools as far as possible to avoid using cloth and staple fibers。

四,为了防止江苏INA轴承的腐蚀,直接使用提姆轴承时彻底洗手,然后使用高质量的矿物油进行操作。在雨季和夏季,我们应特别注意防锈。

Four, in order to prevent corrosion of INA bearing in Jiangsu, wash the hands thoroughly when using Tim bearings directly, and then use high quality mineral oil to operate. In rainy season and summer, we should pay special attention to rust prevention.

然而,在某些特殊的条件下,轴承寿命比传统的计算寿命长,特别是在轻载条件下。这些特殊的操作条件是当滚动表面(履带和滚轮)被润滑油膜有效地分离并限制可能由污染物引起的表面损伤时。

However, under certain special conditions, the life of bearing is longer than that of traditional calculation, especially under light load conditions. These special operating conditions are when the rolling surface (the crawler and roller) is effectively separated by the lubricating oil film and restricts the surface damage that may be caused by the contaminant.

事实上,在理想的条件下,所谓的永久江苏INA轴承寿命是可能的。正确的TIMKEN轴承安装程序有以下几点:第一,确保安装环境清洁。

In fact, under ideal conditions, the so-called permanent Jiangsu INA bearing life is possible. The correct TIMKEN bearing installation procedure has the following points: first, ensure that the installation environment is clean.

如果铁、毛刺、灰尘等异物进入轴承,则会造成江苏INA轴承的噪声和振动在运行,甚至损坏滚道和滚动体。因此,在安装轴承之前,必须确保安装表面的清洁和安装环境。

If iron, burr, dust and other foreign objects enter the bearing, it will cause noise and vibration of INA bearing in Jiangsu to run, or even damage raceway and rolling body. Therefore, before installing the bearing, it is necessary to ensure that the installation surface is clean and the installation environment.

如果轴承安装得当,没有仔细调整,矫直会导致轴承的附加载荷、摩擦和振动。这可能加速疲劳和降低轴承的使用寿命,并可能损坏其他机器部件的使用寿命。此外,增加的振动和摩擦可以大大增加能源消耗和过早失效风险。

If the bearing is properly installed without careful adjustment, the additional load, friction and vibration of the bearing will be caused by straightening. This may accelerate fatigue and reduce the service life of bearings, and may damage the service life of other machine parts. In addition, increased vibration and friction can greatly increase energy consumption and premature failure risk.

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www。klbbearings。com

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-06-18 22:05:30  【打印此页】  【关闭
关于我们 品牌展示
快乐赛车分析软件 快乐飞艇玩法规则 快乐飞艇代理 快乐赛车冠军技巧 快乐赛车怎么买才能中 快乐飞艇怎样稳赚 快乐飞艇有官方吗 快乐飞艇杀一码的网址 快乐赛车pk10 快乐飞艇计划软件