所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承保有式保养的简单方法 来源:御狮轴承   点击:次   日期:2018-06-04 09:52

为了充分发挥盘式干燥机的江苏INA轴承并长期保持其良好性能,必须定期进行定期检修。通过定期检查、发现早期故障和预防事故,对提高生产效率和节约成本具有重要意义。

In order to give full play to the Jiangsu INA bearing of disc drier and maintain its good performance for a long time, regular maintenance must be carried out regularly. Through regular inspections, finding early failures and preventing accidents, it is of great significance to improve production efficiency and save costs.

1)清洗

(1) cleaning

拆下盘式干燥机江苏INA轴承的维护,首先记录轴承外观,确认轴承润滑剂的剩余量,取样后检查润滑剂,清洗盘式干燥机江苏INA轴承,通常使用煤油或汽油,有时使用温度碱性溶液。满足需要。但无论使用哪种清洁剂,都必须定期过滤以保持清洁。

Disassemble disc dryer Jiangsu INA bearing maintenance, first record bearing appearance, confirm the remaining amount of bearing lubricants, sample check lubricants after sampling, clean disk dryer Jiangsu INA bearings, usually use kerosene or gasoline, sometimes use temperature alkaline solution. To meet the needs. However, no matter which detergent is used, it must be filtered regularly to keep it clean.

盘式干燥机的江苏INA轴承的清洗和清洗是在清洗和精洗中进行的。在容器中,首先将金属网底放置,这样盘式干燥器的江苏INA轴承不会直接接触容器中的被盗货物。

The cleaning and cleaning of Jiangsu INA bearing of disc drier is carried out in cleaning and fine washing. In the container, the metal mesh is placed first so that the Jiangsu INA bearing of the disc dryer does not directly touch the stolen goods in the container.

在粗洗过程中,用刷子除去油脂或胶粘剂。此时,如果轴承中的旋转轴承干燥器在油中旋转,则会注意到盘式干燥器的江苏INA轴承滚动表面。

Remove grease or adhesive with a brush during rough washing. At this point, if the rotary bearing drier in the bearing rotates in the oil, the INA bearing rolling surface of the disc dryer will be noticed.

在精洗过程中,在油中旋转盘式干燥器,在清洗时旋转轴承。

In the process of fine washing, the rotary dryer is rotated in the oil, and the bearing is rotated during cleaning。

清洗后,在盘式干燥机的江苏INA轴承上涂防锈油或防锈润滑脂。

After cleaning, apply rust preventive oil or rust preventive grease to Jiangsu INA bearing of disc drier。

2)检查和判断

(2) inspection and judgment

为了判断拆装式盘式干燥机能否使用,应重点考虑其尺寸精度、旋转精度、内间隙和配合面、滚道面、滚动面、保持架和密封圈等。

In order to judge whether or not the disassembled disc dryer can be used, it should focus on its dimension precision, rotation precision, inner clearance and matching surface, raceway surface, rolling face, cage and seal ring.

检验结果可通过盘形干燥器的经验或熟练的江苏INA轴承来判断。判断标准根据机械性能和重要性和检查周期而变化。如果发生以下损坏,盘式干燥机的江苏INA轴承不应重复使用,必须更换。

The test results can be judged by the experience of the disc drier or the skilled Jiangsu INA bearing。 The criteria vary according to mechanical performance and importance and inspection cycle。 If the following damage occurs, the Jiangsu INA bearing of disc drier should not be reused and must be replaced。

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-06-04 09:52:42  【打印此页】  【关闭
关于我们 品牌展示
快乐赛车微信群 快乐赛车是属于彩票吗 快乐赛车代理怎么做的 快乐飞艇怎样玩才有钱赚 快乐赛车开奖纪录 快乐飞艇彩票玩法 快乐飞艇一天开多少期 快乐飞艇官网 快乐赛车开奖纪录 快乐赛车注册网址