所提供的轴承产品全部品质保障。珍惜您的设备,欢迎新老客户前来订购!
联系我们
    鸿御(上海)国际贸易有限公司
    电话:021-56036899
    传真:021-56036877
    手机:13311666672
    QQ:524085168
    邮箱:china_bearing@163.com
    地址:上海市静安区共和新路425号
江苏INA轴承搅拌机配件详述必要性 来源:御狮轴承   点击:次   日期:2018-06-04 08:50

由于搅拌干燥机的江苏INA轴承是经过锈蚀处理和包装的,所以在安装前不必打开包装。此外,在混合干燥器的江苏INA轴承上涂覆的防锈油具有良好的润滑性能。对于一般的搅拌式干燥机江苏INA轴承或填充润滑脂,不能直接清洗搅拌式干燥机轴承。但对于高速干式搅拌干燥机中使用的混合干燥器或INA轴承的INA轴承,用清洁的清洗油冲掉防锈油,搅拌式干燥机的江苏INA轴承容易生锈,不能长期放置。

Because the Jiangsu INA bearing of the stirring dryer is corroded and packaged, there is no need to open the package before installation. In addition, the antirust oil coated on the Jiangsu INA bearing of the mixed dryer has good lubrication performance. For the general stirred dryers, Jiangsu INA bearings or filled grease can not directly clean the bearings of the stirred dryer. But for the mixed dryer or INA bearing INA bearing used in the dry dry mixing dryer, the anti rust oil is washed away with clean cleaning oil. The Jiangsu INA bearing of the stirred dryer is easy to rust and can not be placed for a long time.

清洁搅拌干燥机的轴承和外壳,以确认加工时没有毛刺或毛刺。在壳体中必须没有磨料,例如SiCAl2O3等。其次,检查轴、壳的尺寸、形状和加工质量是否符合图纸要求。NSK混合干燥机的江苏INA轴承的安装方法是由搅拌式干燥机的INA轴承的组合、条件和结构确定的。通常,由于轴的转动,内圈需要过盈配合。用于圆柱孔搅拌的干燥器轴承通常被压入压机或用于热装。锥孔直接安装在锥形轴上或安装有套筒。

Clean the bearing and case of the mixing dryer to confirm that there is no burr or burr in the process。 There must be no abrasives in the shell, such as SiC, Al2O3, etc。 Secondly, check whether the size, shape and machining quality of the shaft and shell conform to the drawing requirements。 The installation method of NSK INA bearing of the NSK mixed dryer is determined by the combination, condition and structure of the INA bearing of the stirred dryer。 Usually, due to the rotation of the shaft, the inner ring needs interference fit。 The dryer bearings used for cylindrical hole agitation are usually pressed into the press or used for hot charging。 The tapered holes are directly mounted on the conical shaft or provided with sleeves。

当安装在壳体上时,一般间隙更兼容,外圈具有干涉体积,通常由压力机压下,或冷却后安装冷缩配合方法。当干冰被用作冷却剂和冷收缩配合时,空气中的水分会在搅拌式干燥器的江苏INA轴承表面凝结。因此,需要采取适当的防锈措施。NSK搅拌式干燥机安装江苏INA轴承是正确的,影响了寿命、精度和性能。因此,设计和装配部门应充分研究搅拌干燥机的INA轴承的安装。希望安装应按照操作标准进行。

When installed on the shell, the general clearance is more compatible, the outer ring has interference volume, usually pressed down by the press, or after cooling, the cold shrink fit method is installed. When dry ice is used as coolant and cold shrink fit, the water in the air condenses on the surface of the INA bearing of the stirred dryer in Jiangsu. Therefore, appropriate measures for antirust need to be taken. NSK stirred dryer installed INA bearing in Jiangsu is correct, affecting the life, accuracy and performance. Therefore, the design and assembly department should fully study the installation of INA bearings for agitator dryer. It is hoped that the installation should be carried out according to the operating standard.

 

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自:江苏INA轴承 www.xzahg.com

The article comes from: Jiangsu INA bearing www.xzahg.com

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www。klbbearings。com

【声明】我站所发布的轴承文章,都是本公司技术原创,我公司对发布的文章拥有著作权,其余网站均不可抄袭,我公司将对抄袭的行为保留法律追究的权利。
点击次数:  更新时间:2018-06-04 08:50:48  【打印此页】  【关闭
关于我们 品牌展示
快乐赛车官方开奖结果 快乐赛车代理资源怎么找 快乐飞艇免费计划 快乐赛车有没有分析的方法 快乐赛车哪个网站有 快乐赛车怎么样才能稳赢 快乐飞艇怎么样稳赚 快乐赛车代理资源怎么找 快乐飞艇怎么玩能赚钱 快乐飞艇怎么样才能赢